|
|
 Overview
Door Types
FX 9000
SR 9000
RT 9000
SR 8000
SR 5500
SR 2000
SR 1000
|
|
 |
|
|
All SR 9000 doors feature a patent pending 1/8" ABS outer shell forming a 1 7/8" thick panel that will retain its physical properties to -40°C.
The SR 9000 door body is impervious to moisture, acid, petroleum products, animal fats, rodents, insects and salt solutions.
Cores are foamed in place high density non-CFC urethane bonded to the outer shell producing an "R" factor of 12.18.
SR 9000 doors are known for their construction of lightweight yet rugged materials, as well as their ease of maintenance and long service life. This allows them to open easily, operate smoothly and allow for safe, damage-free passage of personnel and equipment.
Perimeter edges are bull nosed with a minimum 5/16" radius to prevent excessive wear on the edges all mounted to an internal welded steel perimeter with corner gussets. Gasket keys are molded in place and retain gasketing without the use of screws, rivets or other fasteners. Replacement of gasketing is simple and easily done on site.
Standard single pane vision panels to be one 1/4 " clear acrylic sheet (Tinted Optional) mounted in a foamed in place recessed PVC frame all sealed to the door panel. The clear acrylic sheet is secured in place with a removable PVC bull nose extrusion; no fasteners shall penetrate the acrylic. Optional double pane vision panels to be two 1/8 " clear acrylic sheets (Tinted Optional) mounted in a self locking black rubber gasket offset to the face of the door panel. All single or double pane vision panels are centered at 60" from finish floor as standard and sized based on door panel width, see vision panel chart for sizing.
All SR 9000 Insulated Impact Traffic Doors operate on the CMI Standard Rise "V" cam gravity hinging system complete with bottom hinge pin assembly.
Optional polyethylene spring bumpers, impact plates, partial edge gasketing, lower hinge guards and double pane vision panels are all available. All add years to the life of your door without compromising fit or finish.
The SR 9000 is available in your choice of 14 standard colors, see ABS color chart for your choice.
| Installation & Maintenance |
The SR 9000 Series are conveniently packaged ready to install upon delivery in existing or factory supplied frames. Easy-to-follow instructions along with thread forming fasteners are included in every package.
These require only periodic cleaning with a strong industrial soap or detergent. Regular lubrication of moving parts is also recommended.
The SR 9000 series carries a three year hinging system warranty and two year panel warranty against door panel breakage. All warranties stipulate correct installation and sizing requirements.
Most orders are filled within a 3 to 4 week period. All orders are FOB Winnipeg, MB. Prepaid freight is available at extra cost.
|
|
|
