In compliance with the 2007 Energy Independence and Security Act (EISA)

The FD 9000 Standard Heavy Duty insulated impact traffic doors are designed for applications where carts or motorized pallet jacks are used to transport goods from one area to another.

Good for all pedestrian, carts and motorized pallet jacks in a dry storage, refrigerated or wash down environments.

The FD 9000 series is good for most applications excluding man ridden fork lift traffic.

All FD 9000 doors feature a 1/8" ABS outer shell forming a 3 1/2" thick panel that will retain its physical properties to -40°C.

The FD 9000 door body is impervious to moisture, acid, petroleum products, animal fats, rodents, insects and salt solutions.

Cores are foamed in place high density non-CFC urethane bonded to the outer shell producing an "R" factor of 25.

FD 9000 doors are known for their construction of rugged materials, as well as their ease of maintenance and long service life. This allows them to open easily, operate smoothly and allow for safe, damage-free passage of personnel and equipment.

Perimeter edges are bull nosed with a minimum 5/16" radius to prevent excessive wear on the edges all mounted to an internal dual welded steel perimeter with corner gussets. Gasket keys are molded in place and retain gasketing without the use of screws, rivets or other fasteners. Replacement of gasketing is simple and easily done on site.

Standard double pane vision panels to be two 1/4” clear acrylic sheet (Tinted Optional) mounted in a foamed in place recessed PVC frame. The clear acrylic sheet is secured in place with a removable PVC bull nose extrusion; no fasteners shall penetrate the acrylic. All double pane vision panels are centered at 60" from finish floor as standard and sized based on door panel width, see vision panel chart for sizing.

FD 9000 Flyer

FD 9000 Specifications

All FD 9000 Insulated Impact Traffic Doors operate on the CMI 210 Degree Low Rise "V" cam gravity hinging system complete with lower hinge guard assembly.

Optional polyethylene spring bumpers and impact plates all add years to the life of your door without compromising fit or finish.

The FD 9000 is available in your choice of 9 standard colors, see ABS color chart for your choice.

The FD 9000 Series are conveniently packaged ready to install upon delivery in existing or factory supplied Steel Tube or “C” Channel frames. Easy-to-follow instructions along with thread forming fasteners are included in every package.

These require only periodic cleaning with a strong industrial soap or detergent. Regular lubrication of moving parts is also recommended.

The FD 9000 series carries a three year hinging system warranty and two year panel warranty against door panel breakage. All warranties stipulate correct installation and sizing requirements.